Cylindrical roller bearings with stop ring grooves
cylindrical roller bearings with stop ring grooves are fully mounted self retaining elements, including integral inner and outer rings, side guides, cylindrical rollers, and sealing rings.
outer ring with snap ring. The inner ring is axially opened, wider than the outer ring, and 1mm is supported by the steel bars involved.
positioning bearing
cylindrical roller bearings with stop ring grooves are positioning bearings. These bearings are rigid and can support axial forces in two directions with high centripetal force.
is a full mount design that can have the largest number of rolling elements. So it has very high basic dynamic load and static load. Due to kinematic conditions, it is possible to fail to achieve high speed when using cylindrical roller bearings with cage.
for bearing of cable pulley
has an outer ring groove that allows the bearing ring to be positioned axially without effort. Therefore, the bearing is very suitable for the cable pulley bearing arrangement.
full cylindrical roller bearings
full cylindrical roller bearings with integral inner and outer rings and cylindrical rollers with side guides. Because of the largest number of rolling elements, these bearings are of high centripetal bearing capacity, high rigidity, and are suitable for particularly compact designs. Because of kinematic conditions, they can not reach high speeds that may be achieved by using cylindrical roller bearings with cages.
full cylindrical roller bearings can be used as non positioning bearings, semi positioning bearings as well as positioning bearings. They can be single and double row designs.
X-life
The X-life design offers a wide range of sizes. These bearings are listed in the dimension table. Compared with the non X-life design,
has lower quality bearing roughness of Ra and higher geometric accuracy of raceway X-life. Under the same size condition, the bearing capacity and life of this kind of bearing are higher. In some applications, smaller designs can be designed with bearings if necessary.
high precision cylindrical roller bearings
this type of cylindrical roller bearings are double precision bearings used in machine tools. Allows radial stiffness and high precision bearing configurations, primarily for spindle radial support.
The consists of an integral outer ring without a barrier, an integral inner ring with three sides, a cylindrical roller, and a cage assembly of the brass cage. In order to achieve the best radial internal clearance assembly, the inner design of a 1:12 taper taper hole. Cylindrical roller bearings are removable, so this design makes installation and removal easier. The two bearing rings therefore have interference fit.
low friction cylindrical roller bearings,
low friction cylindrical roller bearings, LSL and ZSL are single row self retaining bearings, in line with size series 23. The overall outer ring of the bearing has two sides, while the inner ring has only one edge. The inner ring can be removed so that it is easier to mount the bearings. A disc cage or pad prevents cylindrical rollers from touching each other during rolling.
X-life
The X-life design offers a wide range of sizes. These bearings are listed in the dimension table. Compared with the non X-life design,
has lower quality bearing roughness of Ra and higher geometric accuracy of raceway X-life. Under the same size condition, the bearing capacity and life of this kind of bearing are higher. In some applications, smaller designs can be designed with bearings if necessary.
cylindrical roller bearings with cage
single row cylindrical roller bearing with cage is a whole including the inner and outer rings, cylindrical roller and cage assembly a set of assemblies. The outer ring on both sides of a rigid retaining wall inner edge or not, one to two rigid wall, or no design rib. The cage prevents the cylindrical roller from touching each other during rolling.
cylindrical roller bearings are rigid and can support high radial loads, and are better suited for high-speed than cage design because of cage. The bearing roller group with suffix E is larger and is designed with ultra high carrying capacity.
this bearing is detachable, so it is easier to install or dismantle. The two bearing rings therefore have interference fit.
single row cylindrical roller bearings with cage can be used as non positioning bearings, semi positioning bearings and positioning bearings.
X-life
The X-life design offers a wide range of sizes. Compared with the non X-life design,
has lower quality bearing roughness of Ra and higher geometric accuracy of raceway X-life. Under the same size condition, the bearing capacity and life of this kind of bearing are higher. In some applications, smaller designs can be designed with bearings if necessary. |
