Oil tester

Grease test assembly | SKF lubrication plan management software

Changes in the state of lubricating oil
SKF TMEH 1 is a portable instrument that displays the state of the oil in real time. In many cases, it is no longer necessary to conduct a lengthy laboratory investigation. The change of the dielectric constant of lubricating oil can be measured by oil inspector. By comparing the values of used and unused lubricating oils of the same grade to determine the degree of change of the lubricating oil. The variation of the dielectric constant is directly related to the deterioration and pollution degree of the lubricating oil, which can make the user get the best oil change period, the wear degree of the machine and the deterioration of the oil lubricating ability. In order to understand the trend of oil pollution, the instrument and digital display.
Note:
SKF is not an analytical instrument. It only detects changes in the state of the lubricant. Image and reading can only serve as a guide for determining the trends in the comparison data between the new and used oils of the same grade. Don't just rely on reading.
The state change of lubricating oil is affected by the following factors:
To contain water
Fuel pollution
Metal content
Oxidation degree
Handheld instrument, simple operation
Digital reading is easy to track
Calibration (high quality lubricants) can be stored in memory

technical parameter
Applicable type of lubricating oil	Mineral oil and synthetic oil
Repeatability	Be better than 95%
Display reading	Green / Red + value（-999 to 999）
Battery	9V Alkaline battery，IEC 6LR61
Battery life	>150 hours or 3000 tests
size	instrument: 250 x 95 x 32 mm (9.8 x 3.7 x 1.3 in.) Hold-all： 530 x 85 x 180 mm (20.9 x 3.4 x 7.0 in.)
weight	instrument: 385 g (14 oz) In the toolbox： 1.2 kg (2.6 lb)